NEWS

RCBO (Residual Current Circuit Breaker with Overcurrent protection) is a kind of comprehensive circuit breaker which can provide overcurrent protection and residual current protection. It is an important safety device in the field of household and industrial electricity, which can automatically cut off the circuit in case of current overload or ground fault to protect personal safety and electrical equipment.

MCB, MCCB, ELCB, RCBO, RCCB: Explaining the different types of circuit breakers

Time relay is a control appliance that uses electromagnetic principle or mechanical principle to achieve time delay control. It has many types, such as air damping type, electric type and electronic type. Time relays can be divided into two types: energized time delay type and power-off time delay t

The role of solid state relaysSolid-state relays are actually non-contact switching devices with relay characteristics that use semiconductor devices to replace traditional electrical contacts as switching devices. Single-phase SSR is a four-terminal active device, of which two input control termina

Everyone is probably familiar with electric energy meters. Nowadays, smart meters are often used to measure and bill household electricity. If you look closely, you will find that there is a parameter 5 (60) written in the prominent position of the electric energy meter.For example, the parameter in

1. What is a leakage protector?Answer: The leakage protector (leakage protection switch) is an electrical safety device. The leakage protector is installed in the low-voltage circuit. When leakage and electric shock occur, and the operating current value limited by the protector is reached, it will

Installation method of power surge arrester1. Install the power lightning arrester in parallel. The installation position of the charcoal machine is the rear end of the switchboard or the knife switch (circuit breaker) in the classroom of the satellite teaching viewing point. Use four sets of M8 pla

The main purpose of the high-voltage isolating switchIt is used to isolate the power supply to ensure the safety of maintenance, so that the electrical equipment under maintenance has an obvious disconnection point from the power supply;2. Carry out the switch-off operation to change the operation m

If your circuit breaker keeps tripping, you must reset it. To reset it, turn off the circuit breaker by moving the switch, then turn it back on. For your own safety, keep a safe distance from the panel to prevent any sparks, or wear safety goggles. Before unplugging and plugging in equipment, reset

The difference between electronic and electrical is as follows:1, the composition of the system is differentElectronics: Electronic information systems.Electrical: Electrical control system.2. Different functionsElectronics: Information processing is the mainstay.Electrical: Mainly for energy applic