Availability: | |
---|---|
America
Specifications
■Rated operation currentle: 9-95A;
■Rated operation voltage(Uel: 220V-690V;
■Roted insulation voltage 690V;
■Poles: 3P;
■Installation: Din rail and screw installation
Operating and Installation Conditions
Type | oPeroting and Instdlaton cardticns |
Instolloton category | III |
Pollution level | 3 |
Certifcation | CE,CB,CCC,TUV |
Protection degree | C7s-09-38 IP20;C7s-40-95 IP10 |
Ambient temperature | imit of temperature:-35℃ -+70℃. normal temperature;-5℃ -+40℃, The average no more than +35℃ within 24 hours. lf not in normal operating temperoture range.please refer to "Instructions for abnormal environment" |
Altitude | ≤2000m |
Ambient temperoture | The maamum temperature of 70 degrees,the air relative humidity not exceed 50%,under lower temperature can allow for higher relative humidity. If the temperature is 20℃,the air relative humidity could up to 90%,Speciol measures should be taken for oocasional condensation due to humidity changes |
Instollation position | Indinaton between installaton surface and vertical surfoce should not exceed±5° |
Shock vibration | Products should be installed and used without significant shake,shock and wibration place |
Specifications
CJK2s Specficotlors | |||||||||||||
Type | C7i-09 | C7i-12 | C7i-18 | C7i-25 | C71-32 | C7i-38 | C7i-40 | C7i-50 | C7i-65 | C7i-80 | C7i-95 | ||
Main circuit choroctenstic | |||||||||||||
Poles | 3P | ||||||||||||
Rated insulation voltage(Ui | V | 690 | |||||||||||
Rated operating voltage(Uel | V | 380/400.660/690 | |||||||||||
Rated thermal current(lth),AC-1 | 20 | 20 | 32 | 40 | 50 | 50 | 60 | 80 | 80 | 125 | 125 | ||
Rated operation currentlle | AC-3.380/400V | A | 9 | 12 | 18 | 25 | 32 | 38 | 40 | 50 | 65 | 80 | 95 |
AC-3,660/690V | A | 6.6 | 8.9 | 12 | 18 | 22 | 22 | 34 | 39 | 42 | 49 | 49 | |
AC-4,380/400V | A | 3.5 | 5 | 7.7 | 8.5 | 12 | 14 | 18.5 | 24 | 28 | 37 | 44 | |
AC-4.660/690V | A | 1.5 | 2 | 3.8 | 4.4 | 7.5 | 8.9 | 9 | 12 | 14 | 17.3 | 21.3 | |
Rated operational powerlPe | AC-3,380/400V | kW | 4 | 5.5 | 7.5 | 11 | 15 | 18.5 | 18.5 | 22 | 30 | 37 | 45 |
AC-3.660/690V | kW | 5.5 | 7.5 | 10 | 15 | 18.5 | 18.5 | 30 | 33 | 37 | 45 | 45 | |
AC-4,.380/400V | kW | 1.5 | 2.2 | 33 | 4 | 5.4 | 5.5 | 7.5 | 11 | 15 | 18.5 | 22 | |
AC-4,660/690V | kW | 11 | 1.5 | 3 | 3.7 | 5.5 | 6 | 7.5 | 10 | 11 | 15 | 18.5 | |
Mechanical life | 1200 | 1000 | 900 | 650 | |||||||||
Electrcal life | AC-3 | 10000 times | 110 | 90 | 65 | ||||||||
AC-4 | 22 | 22 | 17 | 11 | |||||||||
Frequency of operation | AC-3 | times/ hour | 1200 | 600 | |||||||||
AC-4 | 300 | 300 | |||||||||||
Connecting copability of main circuit terminal | |||||||||||||
Flexible wire | 1 wite | mm² | 1…4 | 1.5…6 | 2.5…25 | 4…50 | |||||||
No terminal | 2 wire | mm² | 1…4 | 1.5…6 | 2.5…16 | 4…25 | |||||||
Flexible wire | 1 wire | mm² | 1…4 | 1…6 | 2.5…25 | 4…50 | |||||||
With terminals | 2 wire | mm² | 1…2.5 | 1…4 | 2.5…10 | 4…16 | |||||||
Hard wire | 1 wire | mm² | 1…4 | 1.5…6 | 1.5..10 | 2.5…25 | 4…50 | ||||||
No terminal | 2 wire | mm² | 1…4 | 1.5… | 2.5…10 | 4…25 | |||||||
Fastening torque | N-m | 1.2 | 1.8 | 5 | 9 | ||||||||
Coil | |||||||||||||
Rated control voltage{Us | 50Hz | V | 24、36、48、110、127、220/230、240、380/400、415、440 | ||||||||||
50/60Hz | V | 24、36、48、110、127、220/230、240、380/400、415、440 | |||||||||||
Alowed control crcuit voltagelUs) | Operation | V | Installation inclination angle ±22.5*:85%~1109%Us;Installation incination angle±5:709%~120% | ||||||||||
Release | V | Installation inclination angle ±22.5*:20%~75%Us;Installation inclination angle±5*:20%~65% | |||||||||||
Power consumption of coil | Actuation | VA | 60 | 70 | 200 | 200 | |||||||
Keep | VA | 6-9.5 | 6-9.5 | 15-20 | 15-20 | ||||||||
Consumption | W | 1-3 | 1-3 | 6-10 | 6-10 | ||||||||
Auxiliory contocts | |||||||||||||
Auxiliory contocts specification | A | 11 | |||||||||||
Rated thermal current (ith) | A | 10 | |||||||||||
Rated operating voltoge Ue | AC | V | 380 | ||||||||||
DC | V | 220 | |||||||||||
Rated control capacit | AC-15 | VA | 360 | ||||||||||
DC-13 | W | 33 | |||||||||||
Certification | CCC.CE.TUV.CB |
Overall and Mounting
C7i-09-38
C7i-09-38
Type Amax | Amax | Bmax | Cmax | a | b | C | d | e | f |
C7i-09.12.18 | 74.5 | 45.5 | 85.5 | 35 | 50/60 | ||||
C7i-25.32.38 | 83 | 56.5 | 97 | 40 | 50/70 | ||||
C71-40.50.65 | 127.5 | 74.5 | 117 | 105 | 40 | 100/110 | 59 | ||
C7i-80.95 | 127.5 | 85.5 | 125.5 | 105 | 40 | 100/110 | 67 |
Specifications
■Rated operation currentle: 9-95A;
■Rated operation voltage(Uel: 220V-690V;
■Roted insulation voltage 690V;
■Poles: 3P;
■Installation: Din rail and screw installation
Operating and Installation Conditions
Type | oPeroting and Instdlaton cardticns |
Instolloton category | III |
Pollution level | 3 |
Certifcation | CE,CB,CCC,TUV |
Protection degree | C7s-09-38 IP20;C7s-40-95 IP10 |
Ambient temperature | imit of temperature:-35℃ -+70℃. normal temperature;-5℃ -+40℃, The average no more than +35℃ within 24 hours. lf not in normal operating temperoture range.please refer to "Instructions for abnormal environment" |
Altitude | ≤2000m |
Ambient temperoture | The maamum temperature of 70 degrees,the air relative humidity not exceed 50%,under lower temperature can allow for higher relative humidity. If the temperature is 20℃,the air relative humidity could up to 90%,Speciol measures should be taken for oocasional condensation due to humidity changes |
Instollation position | Indinaton between installaton surface and vertical surfoce should not exceed±5° |
Shock vibration | Products should be installed and used without significant shake,shock and wibration place |
Specifications
CJK2s Specficotlors | |||||||||||||
Type | C7i-09 | C7i-12 | C7i-18 | C7i-25 | C71-32 | C7i-38 | C7i-40 | C7i-50 | C7i-65 | C7i-80 | C7i-95 | ||
Main circuit choroctenstic | |||||||||||||
Poles | 3P | ||||||||||||
Rated insulation voltage(Ui | V | 690 | |||||||||||
Rated operating voltage(Uel | V | 380/400.660/690 | |||||||||||
Rated thermal current(lth),AC-1 | 20 | 20 | 32 | 40 | 50 | 50 | 60 | 80 | 80 | 125 | 125 | ||
Rated operation currentlle | AC-3.380/400V | A | 9 | 12 | 18 | 25 | 32 | 38 | 40 | 50 | 65 | 80 | 95 |
AC-3,660/690V | A | 6.6 | 8.9 | 12 | 18 | 22 | 22 | 34 | 39 | 42 | 49 | 49 | |
AC-4,380/400V | A | 3.5 | 5 | 7.7 | 8.5 | 12 | 14 | 18.5 | 24 | 28 | 37 | 44 | |
AC-4.660/690V | A | 1.5 | 2 | 3.8 | 4.4 | 7.5 | 8.9 | 9 | 12 | 14 | 17.3 | 21.3 | |
Rated operational powerlPe | AC-3,380/400V | kW | 4 | 5.5 | 7.5 | 11 | 15 | 18.5 | 18.5 | 22 | 30 | 37 | 45 |
AC-3.660/690V | kW | 5.5 | 7.5 | 10 | 15 | 18.5 | 18.5 | 30 | 33 | 37 | 45 | 45 | |
AC-4,.380/400V | kW | 1.5 | 2.2 | 33 | 4 | 5.4 | 5.5 | 7.5 | 11 | 15 | 18.5 | 22 | |
AC-4,660/690V | kW | 11 | 1.5 | 3 | 3.7 | 5.5 | 6 | 7.5 | 10 | 11 | 15 | 18.5 | |
Mechanical life | 1200 | 1000 | 900 | 650 | |||||||||
Electrcal life | AC-3 | 10000 times | 110 | 90 | 65 | ||||||||
AC-4 | 22 | 22 | 17 | 11 | |||||||||
Frequency of operation | AC-3 | times/ hour | 1200 | 600 | |||||||||
AC-4 | 300 | 300 | |||||||||||
Connecting copability of main circuit terminal | |||||||||||||
Flexible wire | 1 wite | mm² | 1…4 | 1.5…6 | 2.5…25 | 4…50 | |||||||
No terminal | 2 wire | mm² | 1…4 | 1.5…6 | 2.5…16 | 4…25 | |||||||
Flexible wire | 1 wire | mm² | 1…4 | 1…6 | 2.5…25 | 4…50 | |||||||
With terminals | 2 wire | mm² | 1…2.5 | 1…4 | 2.5…10 | 4…16 | |||||||
Hard wire | 1 wire | mm² | 1…4 | 1.5…6 | 1.5..10 | 2.5…25 | 4…50 | ||||||
No terminal | 2 wire | mm² | 1…4 | 1.5… | 2.5…10 | 4…25 | |||||||
Fastening torque | N-m | 1.2 | 1.8 | 5 | 9 | ||||||||
Coil | |||||||||||||
Rated control voltage{Us | 50Hz | V | 24、36、48、110、127、220/230、240、380/400、415、440 | ||||||||||
50/60Hz | V | 24、36、48、110、127、220/230、240、380/400、415、440 | |||||||||||
Alowed control crcuit voltagelUs) | Operation | V | Installation inclination angle ±22.5*:85%~1109%Us;Installation incination angle±5:709%~120% | ||||||||||
Release | V | Installation inclination angle ±22.5*:20%~75%Us;Installation inclination angle±5*:20%~65% | |||||||||||
Power consumption of coil | Actuation | VA | 60 | 70 | 200 | 200 | |||||||
Keep | VA | 6-9.5 | 6-9.5 | 15-20 | 15-20 | ||||||||
Consumption | W | 1-3 | 1-3 | 6-10 | 6-10 | ||||||||
Auxiliory contocts | |||||||||||||
Auxiliory contocts specification | A | 11 | |||||||||||
Rated thermal current (ith) | A | 10 | |||||||||||
Rated operating voltoge Ue | AC | V | 380 | ||||||||||
DC | V | 220 | |||||||||||
Rated control capacit | AC-15 | VA | 360 | ||||||||||
DC-13 | W | 33 | |||||||||||
Certification | CCC.CE.TUV.CB |
Overall and Mounting
C7i-09-38
C7i-09-38
Type Amax | Amax | Bmax | Cmax | a | b | C | d | e | f |
C7i-09.12.18 | 74.5 | 45.5 | 85.5 | 35 | 50/60 | ||||
C7i-25.32.38 | 83 | 56.5 | 97 | 40 | 50/70 | ||||
C71-40.50.65 | 127.5 | 74.5 | 117 | 105 | 40 | 100/110 | 59 | ||
C7i-80.95 | 127.5 | 85.5 | 125.5 | 105 | 40 | 100/110 | 67 |